#include <dt-bindings/thermal/thermal_qti.h>

&soc {
	qmi-tmd-devices {
		compatible = "qcom,qmi-cooling-devices";

		modem {
			qcom,instance-id = <QMI_MODEM_INST_ID>;

			modem_lte_dsc: modem_lte_dsc {
				qcom,qmi-dev-name = "modem_lte_dsc";
				#cooling-cells = <2>;
			};

			modem_nr_dsc: modem_nr_dsc {
				qcom,qmi-dev-name = "modem_nr_dsc";
				#cooling-cells = <2>;
			};

			modem_nr_scg_dsc: modem_nr_scg_dsc {
				qcom,qmi-dev-name = "modem_nr_scg_dsc";
				#cooling-cells = <2>;
			};

			sdr0_lte_dsc: sdr0_lte_dsc {
				qcom,qmi-dev-name = "sdr0_lte_dsc";
				#cooling-cells = <2>;
			};

			sdr0_nr_dsc: sdr0_nr_dsc {
				qcom,qmi-dev-name = "sdr0_nr_dsc";
				#cooling-cells = <2>;
			};

			pa_lte_sdr0_dsc: pa_lte_sdr0_dsc {
				qcom,qmi-dev-name = "pa_lte_sdr0_dsc";
				#cooling-cells = <2>;
			};

			pa_nr_sdr0_dsc: pa_nr_sdr0_dsc {
				qcom,qmi-dev-name = "pa_nr_sdr0_dsc";
				#cooling-cells = <2>;
			};

			pa_nr_sdr0_scg_dsc: pa_nr_sdr0_scg_dsc {
				qcom,qmi-dev-name = "pa_nr_sdr0_scg_dsc";
				#cooling-cells = <2>;
			};

			mmw0_dsc: mmw0_dsc {
				qcom,qmi-dev-name = "mmw0_dsc";
				#cooling-cells = <2>;
			};

			mmw1_dsc: mmw1_dsc {
				qcom,qmi-dev-name = "mmw1_dsc";
				#cooling-cells = <2>;
			};

			mmw2_dsc: mmw2_dsc {
				qcom,qmi-dev-name = "mmw2_dsc";
				#cooling-cells = <2>;
			};

			mmw3_dsc: mmw3_dsc {
				qcom,qmi-dev-name = "mmw3_dsc";
				#cooling-cells = <2>;
			};

			mmw_ific_dsc: mmw_ific_dsc {
				qcom,qmi-dev-name = "mmw_ific_dsc";
				#cooling-cells = <2>;
			};

			qmi_wlan: wlan {
				qcom,qmi-dev-name = "wlan";
				#cooling-cells = <2>;
			};

			modem_bw_backoff: modem_bw_backoff {
				qcom,qmi-dev-name = "modem_bw_backoff";
				#cooling-cells = <2>;
			};

			modem_wlan_bw: modem_wlan_bw {
				qcom,qmi-dev-name = "wlan_bw";
				#cooling-cells = <2>;
			};

			modem_vdd: modem_vdd {
				qcom,qmi-dev-name = "cpuv_restriction_cold";
				#cooling-cells = <2>;
			};

			modem_lte_sub1_dsc: modem_lte_sub1_dsc {
				qcom,qmi-dev-name = "modem_lte_sub1_dsc";
				#cooling-cells = <2>;
			};

			modem_nr_sub1_dsc: modem_nr_sub1_dsc {
				qcom,qmi-dev-name = "modem_nr_sub1_dsc";
				#cooling-cells = <2>;
			};

			modem_nr_scg_sub1_dsc: modem_nr_scg_sub1_dsc {
				qcom,qmi-dev-name = "modem_nr_scg_sub1_dsc";
				#cooling-cells = <2>;
			};

			pa_lte_sdr0_sub1_dsc: pa_lte_sdr0_sub1_dsc {
				qcom,qmi-dev-name = "pa_lte_sdr0_sub1_dsc";
				#cooling-cells = <2>;
			};

			pa_nr_sdr0_sub1_dsc: pa_nr_sdr0_sub1_dsc {
				qcom,qmi-dev-name = "pa_nr_sdr0_sub1_dsc";
				#cooling-cells = <2>;
			};

			pa_nr_sdr1_sub1_dsc: pa_nr_sdr0_scg_sub1_dsc {
				qcom,qmi-dev-name = "pa_nr_sdr0_scg_sub1_dsc";
				#cooling-cells = <2>;
			};

			mmw0_sub1_dsc: mmw0_sub1_dsc {
				qcom,qmi-dev-name = "mmw0_sub1_dsc";
				#cooling-cells = <2>;
			};

			mmw1_sub1_dsc: mmw1_sub1_dsc {
				qcom,qmi-dev-name = "mmw1_sub1_dsc";
				#cooling-cells = <2>;
			};

			mmw2_sub1_dsc: mmw2_sub1_dsc {
				qcom,qmi-dev-name = "mmw2_sub1_dsc";
				#cooling-cells = <2>;
			};

			mmw3_sub1_dsc: mmw3_sub1_dsc {
				qcom,qmi-dev-name = "mmw3_sub1_dsc";
				#cooling-cells = <2>;
			};

			mmw_ific_sub1_dsc: mmw_ific_sub1_dsc {
				qcom,qmi-dev-name = "mmw_ific_sub1_dsc";
				#cooling-cells = <2>;
			};

		};
	};

	qmi_sensor: qmi-ts-sensors {
		compatible = "qcom,qmi-sensors";
		#thermal-sensor-cells = <1>;

		modem {
			qcom,instance-id = <QMI_MODEM_INST_ID>;
			qcom,qmi-sensor-names = "pa",
						"pa_1",
						"modem_bcl_warn",
						"sdr0_pa",
						"sdr0",
						"mmw0",
						"mmw1",
						"mmw2",
						"mmw3",
						"mmw_ific0",
						"epm0",
						"epm1",
						"epm2",
						"epm3",
						"epm4",
						"epm5",
						"epm6",
						"epm7",
						"modem_cfg",
						"lte_cc",
						"mcg_fr1_cc",
						"mcg_fr2_cc",
						"scg_fr1_cc",
						"scg_fr2_cc",
						"sub1_modem_cfg",
						"sub1_lte_cc",
						"sub1_mcg_fr1_cc",
						"sub1_mcg_fr2_cc",
						"sub1_scg_fr1_cc",
						"sub1_scg_fr2_cc";
		};
	};
};

&thermal_zones {
	pa {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_PA)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	pa1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_PA_1)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	bcl_warn {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_BCL_WARN)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	sdr0_pa {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SDR0_PA)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	sdr0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SDR0)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	mmw0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_MMW0)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	mmw1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_MMW1)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	mmw2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_MMW2)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	mmw3 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_MMW3)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	mmw_ific0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_MMW_IFIC0)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	epm0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_EPM0)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	epm1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_EPM1)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	epm2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_EPM2)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	epm3 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_EPM3)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	epm4 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_EPM4)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	epm5 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_EPM5)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	epm6 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_EPM6)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	epm7 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_EPM7)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	modem_cfg {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_MODEM_CFG)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	lte_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_LTE_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	mcg_fr1_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_MCG_FR1_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	mcg_fr2_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_MCG_FR2_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	scg_fr1_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SCG_FR1_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	scg_fr2_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SCG_FR2_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	sub1_modem_cfg {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SUB1_MODEM_CFG)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	sub1_lte_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SUB1_LTE_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	sub1_mcg_fr1_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SUB1_MCG_FR1_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	sub1_mcg_fr2_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SUB1_MCG_FR2_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	sub1_scg_fr1_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SUB1_SCG_FR1_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	sub1_scg_fr2_cc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&qmi_sensor
				(QMI_MODEM_INST_ID+QMI_SUB1_SCG_FR2_CC)>;
		trips {
			thermal-engine-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};
};