#include <linux/module.h>
#define INCLUDE_VERMAGIC
#include <linux/build-salt.h>
#include <linux/elfnote-lto.h>
#include <linux/vermagic.h>
#include <linux/compiler.h>

BUILD_SALT;
BUILD_LTO_INFO;

MODULE_INFO(vermagic, VERMAGIC_STRING);
MODULE_INFO(name, KBUILD_MODNAME);

__visible struct module __this_module
__section(".gnu.linkonce.this_module") = {
	.name = KBUILD_MODNAME,
	.init = init_module,
#ifdef CONFIG_MODULE_UNLOAD
	.exit = cleanup_module,
#endif
	.arch = MODULE_ARCH_INIT,
};

#ifdef CONFIG_RETPOLINE
MODULE_INFO(retpoline, "Y");
#endif

static const struct modversion_info ____versions[]
__used __section("__versions") = {
	{ 0x222dd63, "module_layout" },
	{ 0xc2c193d2, "__stack_chk_fail" },
	{ 0xdf7a4c69, "__ubsan_handle_cfi_check_fail_abort" },
	{ 0x2cc98f97, "i2c_del_driver" },
	{ 0x9a45b209, "regulator_put" },
	{ 0x4eec1779, "regulator_disable" },
	{ 0x73bca09f, "gpiod_direction_output_raw" },
	{ 0xec1d4dae, "rdev_get_id" },
	{ 0x3300c65, "rdev_get_drvdata" },
	{ 0xafec8f0c, "regulator_is_enabled_regmap" },
	{ 0xd75b74e7, "regulator_disable_regmap" },
	{ 0x8a1032da, "regulator_enable_regmap" },
	{ 0xd5e61d97, "regulator_get_voltage_sel_regmap" },
	{ 0x5ab826ce, "regulator_set_voltage_sel_regmap" },
	{ 0x992b9d9c, "regulator_map_voltage_linear" },
	{ 0xb165253c, "regulator_list_voltage_linear" },
	{ 0xb01f1abd, "gpio_to_desc" },
	{ 0xc151236f, "devm_regulator_register" },
	{ 0xd43025f1, "regmap_write" },
	{ 0xf17c4a7d, "of_get_named_gpio_flags" },
	{ 0x8dbcad91, "devm_kmalloc" },
	{ 0x92997ed8, "_printk" },
	{ 0xcf01e6f2, "regmap_bulk_read" },
	{ 0xd58b01d7, "regmap_read" },
	{ 0x9b7ed4e8, "__devm_regmap_init_i2c" },
	{ 0xeae3dfd6, "__const_udelay" },
	{ 0x32e96165, "devm_gpio_request_one" },
	{ 0xf4cff926, "_dev_warn" },
	{ 0xa27d944, "regulator_enable" },
	{ 0x6aefebc3, "_dev_info" },
	{ 0x4adae8ee, "devm_regulator_get" },
	{ 0xfb83a2a6, "_dev_err" },
	{ 0xf2194178, "i2c_register_driver" },
};

MODULE_INFO(depends, "");

MODULE_ALIAS("i2c:wl2868c");

MODULE_INFO(scmversion, "g6cc9bfcd5850");